5 April 2013

How to make rustic numbered signs

In my bookcase makeover post yesterday you saw some numbered signs that I made for the baskets. I thought I'd explain how I made them.

 photo howtomakesigns21_zps6464582a.jpg

Can you guess what they are made of? I wanted to make them out of little wooden plaques but none of my dollar stores has any so I used what I had in the house - tongue depressers / wide popsicle sticks. I think they turned out even better than plain flat wooden plaques.

 photo howtomakesigns20_zpscd68a3fc.jpg

To begin with I cut the curvedends off of the sticks. To do this I used my metal ruler and craft knife to score over and over into the wood.

 photo howtomakesigns01_zpsc695baa9.jpg

Then I snapped the end ...

 photo howtomakesigns02_zps039eaef3.jpg

... and used scissors to cut through the remaining wood.

 photo howtomakesigns03_zps266ee624.jpg

Once I had cut the ends off all of the sticks ...

 photo howtomakesigns05_zpsa0c036d9.jpg

... it was time to do the other ends. I put four together and scored them at the same time. It was a bit tricky as the sticks kept wanting to shift, but not too bad.

 photo howtomakesigns04_zps837a0d05.jpg

Then I cut some pieces of card slightly smaller than the sticks and used all-purpose glue to glue them on to hold the sticks together for each sign.

 photo howtomakesigns06_zpsdd1b776a.jpg

 photo howtomakesigns07_zps64a2c59a.jpg

I pressed them under books while they dried. Then it was time for painting. I mixed up a light grey colour with acrylic paints that I had, watering it down so it was a little sheer, and painted that on.

 photo howtomakesigns10_zps214472f1.jpg

Then I dry-brushed on some white for a bit of dimension. The signs needed pressing again as they dried as the wood wanted to curl. I waited until they were half-dry then layered parchment paper over them and placed them under heavy objects.

 photo howtomakesigns11_zps11ed723c.jpg

I wanted to age the signs a little and in the end I decided on eyeshadow! I just rubbed a bit onto the signs, concentrating on the edges. Here you can see how the signs looked before and after the eyeshadow.

 photo howtomakesigns13_zpsf0404c6c.jpg

Then it was time for the numbers. After deciding on which font I wanted to use (Century Schoolbook) and making the numbers the right size, I printed them out.

 photo howtomakesigns12_zps7b33ad79.jpg

I cut each number out, laid it onto a sign and using a ballpoint pen I outlined the number, pressing hard.

 photo howtomakesigns14_zps59db28cd.jpg

This left an indentation on the wood.

 photo howtomakesigns15_zps74edc766.jpg

I used a sharp pencil to follow the indentation and outline each number.

 photo howtomakesigns16_zps8651a2ee.jpg

Then I mixed some black acrylic paint with a bit of white to lighten it and watered it down. I didn't want stark black numbers. I used a fine paintbrush to fill in the numbers.

 photo howtomakesigns17_zps331967a5.jpg

While the paint was drying I was preparing the paper fasteners / brads. I stuck them into a piece of steel wool and painted them with some rusty reddish-brown nail polish.

 photo howtomakesigns08_zps804aa9a9.jpg

They looked too shiny so when they were dry I dabbed on some dark brown acrylic paint.

 photo howtomakesigns09_zps5cd59641.jpg

Time to assemble the signs and attach them to the baskets! I used my Cropodile tool to punch holes in either end of each sign.

 photo howtomakesigns18_zps5fc69f7e.jpg

 photo howtomakesigns19_zps4f886519.jpg

Then I held them to the front of the baskets, stuck a paper fastener through each hole and through the basket and bent the little legs open to hold it in place. I'm really pleased with how they turned out and they are easily removed if I want to change them in future. What do you think?

 photo howtomakesigns20_zpscd68a3fc.jpg





Pin It
Related Posts Plugin for WordPress, Blogger...